The LG ZEUS 30 kg industrial dryer has been developed for laundry operations where capacity, speed and energy costs are decisive factors. As the largest dryer in the new ZEUS range, this industrial heat pump dryer combines a 30 kg load capacity with a generous 600-litre drum. It marks a new era in large-format industrial laundry drying from LG.
The high capacity allows larger laundry batches to be processed in fewer cycles. This increases daily throughput while making efficient use of the available installation space. The industrial tumble dryer is particularly suitable for industrial laundries, large hotels, hospitals, care facilities, facility service providers, public authorities and industrial operations with substantial laundry volumes.
A door opening measuring up to 731 mm in diameter makes it easier to load bed linen, towels, workwear and other bulky textiles. A drum speed of 41 rpm provides consistent laundry movement and supports efficient airflow throughout the large drying drum.
Heat is generated by a powerful inverter dual compressor. The heat pump system recirculates process heat within a closed circuit instead of discharging it outside, as occurs with a conventional vented industrial dryer. This allows the supplied energy to be used particularly efficiently. According to the manufacturer, drying times and energy costs can be reduced by up to 60% compared with conventional technology under the relevant operating and test conditions.
The 30 kg industrial dryer achieves a high evaporation performance of 214 g/min. At the same time, the technical catalogue specifies an energy consumption value of 7.0 kWh. This provides the highest-capacity model with a compelling combination of high throughput and low stated energy consumption. Actual values depend on factors including textile type, initial moisture content, load and selected programme.
The two-stage heat exchanger is another important part of the high-performance drying concept. An additional heat exchanger operates alongside the condenser. This allows the process air to reach the required temperature more quickly and transfer heat efficiently to the textiles. Manufacturer testing indicates that the heating phase can be shortened by up to 15 minutes and evaporation performance improved by up to 40%, allowing large laundry batches to be processed more quickly.
A major advantage over conventional vented industrial dryers is the ventless design. The LG ZEUS industrial heat pump dryer requires neither an exhaust hose nor expensive ductwork. It can therefore be installed in basements, high-rise buildings, urban properties and existing premises where an exhaust system would be difficult or impossible to install. Maintenance and cleaning work associated with long exhaust ducts is also eliminated.
AI-supported sensor drying continuously determines the moisture level of the laundry. Two intelligent sensors adapt the drying time to actual demand and end the process once the selected dryness level has been reached. This prevents unnecessary overdrying, protects the textiles and can reduce both energy consumption and operating costs.
To maintain consistently high drying performance, the heat exchanger is cleaned automatically during every cycle. Integrated water nozzles remove lint and deposits, helping to preserve airflow and heat transfer. Depending on use and environmental conditions, the manufacturer states that additional manual cleaning may only be required approximately once every six months. This reduces maintenance requirements and supports reliable continuous operation.
Drum and deep-cleaning functions, proactive machine monitoring and front service access complete the professional design. Operating conditions can be monitored through the management application, while potential problems can be reported at an early stage. FOTA technology enables automatic software updates without requiring each update to be installed manually at the machine.
The LG ZEUS 30 kg industrial dryer is a powerful solution for companies seeking to combine maximum capacity with advanced heat pump technology. High evaporation performance, low stated energy consumption, ventless installation and intelligent textile care make it a future-ready alternative to conventional vented industrial dryers.
Key Features
- Heat pump with inverter dual compressor
- Two-stage heat exchanger system
- AI-supported sensor drying
- Ventless operation without exhaust ducting
- Automatic heat exchanger cleaning
- Proactive monitoring and FOTA updates
Technical Data
- Capacity: 30 kg
- Drum volume: 600 litres
- Dryer system: ventless industrial heat pump dryer
- Evaporation performance: 214 g/min
- Energy consumption: 7.0 kWh
- Dimensions (W × H × D): 970 × 1,813 × 1,487 mm
- Weight: 310 kg
