The LG ZEUS industrial washer-dryer with 25 kg washing and 16 kg drying capacity combines two complete processing stages within a single industrial laundry machine. Laundry is washed, extracted and then dried directly inside the same drum. With a load not exceeding the drying capacity, the time-consuming transfer to a separate industrial dryer is eliminated completely.
Under the conditions stated in the product brochure, the combined washing and drying process can be completed in only 60 minutes. This reduces transport distances, limits manual handling and makes clean laundry available for its next use more quickly. The industrial washer-dryer also provides a major advantage where installation space is limited, as only one machine is required for both process stages.
With this concept, LG is opening a new era in industrial laundry technology. The LG ZEUS industrial washer-dryer is suitable for hotels, hospitals, care facilities, facility service providers, fire brigades, emergency services, industrial operations and professional laundries. The all-in-one solution is particularly valuable wherever laundry must be ready for reuse within a short period.
A washing capacity of 25 kg and a drum volume of 250 litres are available for the washing process. The Dynamic Ball Core System combines a gyro sensor with an innovative ball-balancing mechanism. Imbalances are detected and compensated for, allowing the industrial washer-dryer to achieve an extraction speed of up to 1,100 rpm and a centrifugal force of 520 G.
The powerful extraction process reduces residual moisture before the drying phase begins. The heat pump therefore has less water to remove from the textiles, helping to shorten the subsequent drying process and reduce energy demand. The stabilised drum and lower vibration levels also reduce mechanical stress on the machine.
Five-stage AI load detection analyses the laundry load and automatically adapts the washing process. Water, energy and detergent can therefore be used according to actual demand. The dual spray nozzle system applies water and wash liquor that has already been mixed with detergent directly to the textiles. The load is wetted more quickly and evenly, while the detergent solution is distributed more effectively throughout the laundry. Compared with conventional water inlet systems, this can accelerate the washing process and reduce the required water intake.
After extraction, drying starts without any manual transfer. A powerful inverter dual compressor generates the necessary heat. The two-stage heat exchanger reaches the target temperature particularly quickly and transfers heat efficiently to the textiles. According to the manufacturer, drying times and energy costs can be reduced by up to 60% compared with conventional drying systems under the relevant test conditions.
As the LG ZEUS industrial washer-dryer requires neither an exhaust hose nor external exhaust ductwork, it provides exceptional installation flexibility. This is a significant advantage in basements, high-rise buildings, urban properties and existing laundries where installing an exhaust duct would involve considerable effort or may not be possible.
During drying, intelligent sensors continuously monitor the moisture level of the textiles. The drying time is adapted to actual demand, helping to prevent unnecessary overdrying. This protects bed linen, towels, workwear and delicate textiles while reducing energy consumption and unnecessary programme time.
For demanding textiles, the industrial washer-dryer incorporates a professional wet-cleaning process. Variable drum movements and adapted rotation speeds provide controlled and gentle treatment during washing and drying. This makes the industrial laundry machine suitable for professional wet-cleaning applications and more delicate textiles.
Integrated drum and deep-cleaning functions support consistently hygienic operating conditions. According to the manufacturer, a high-temperature hygiene cycle removes up to 99.99% of tested germs and has been certified by Intertek. This is particularly important for hospitals, care facilities, hotels and other environments with demanding hygiene requirements.
Proactive machine monitoring, digital management and FOTA technology complete the concept. Potential problems can be identified at an early stage and reported through the management application. Software updates can be provided automatically. Integrated forklift pockets simplify installation, while front service access makes important components easier to reach.
The LG ZEUS 25/16 kg industrial washer-dryer is therefore far more than a space-saving combination of two machines. It combines powerful washing performance, high-force extraction and energy-efficient heat pump drying within one continuous process. For operations seeking to combine speed, economy and maximum space efficiency, it provides a revolutionary solution for industrial laundry care
Features
- Washing and drying without reloading in 60 minutes
- Dynamic Ball Core System with 1,100 rpm and 520 G
- AI load detection with dual spray nozzles
- Inverter heat pump with two-stage heat exchanger
- Ventless, sensor-controlled drying
- Drum cleaning and digital machine management
Technical Data
- Capacity: 25 kg washing / 16 kg drying
- Drum volume: 250 litres
- Extraction performance: 1,100 rpm / 520 G
- Drying system: ventless heat pump
- Washing and drying time: 60 minutes
- Dimensions (W × H × D): 970 × 1,871 × 1,272 mm
- Weight: 420 kg
